Andes Workshop
http://forum.andestech.com/

About SPI Flash Burner build in AndeSight3.0
http://forum.andestech.com/viewtopic.php?f=6&t=981
Page 1 of 1

Author:  Richard Kwan [ Mon Jun 26, 2017 1:27 pm ]
Post subject:  About SPI Flash Burner build in AndeSight3.0

Please refer to the attached document《SPI_Burner.pdf》,and follow the steps as follows.
1. Open “Cygwin” environment.
Attachment:
open Cygwin .png
open Cygwin .png [ 47.73 KiB | Viewed 9826 times ]

2. Get in the SPI burner source code in”C:\Andestech\<AndeSight/BSP>\flash\src-SPI_burn”.
Attachment:
flash burner.png
flash burner.png [ 16.77 KiB | Viewed 9826 times ]

3. Add the w32api compressed package under /lib of Cygwin environment in the path of AndeSight_V300_STD\cygwin,then untar the w32api package by the command tar -xzvf w32api.tar.gz.
Attachment:
untar w32api_1.png
untar w32api_1.png [ 37.86 KiB | Viewed 9818 times ]

Attachment:
untar w32api_2.png
untar w32api_2.png [ 21.58 KiB | Viewed 9826 times ]

4. Clean – $ make -f Makefile_SPIburn_linux ,Build – $ make -f Makefile_SPIburn_linux.
Attachment:
build.png
build.png [ 31.54 KiB | Viewed 9826 times ]


Attachments:
w32api.tar.gz [2.32 MiB]
Downloaded 961 times
SPI_Burner.pdf [1.23 MiB]
Downloaded 1139 times

Page 1 of 1 All times are UTC + 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/