Andes Workshop
http://forum.andestech.com/

License Deploy Detect App Usage (AndeSight v2.0.1 mcu)
http://forum.andestech.com/viewtopic.php?f=23&t=835
Page 1 of 1

Author:  cindy [ Sun Apr 27, 2014 10:10 pm ]
Post subject:  License Deploy Detect App Usage (AndeSight v2.0.1 mcu)

License Deploy Detect App
Please download this tool:
Attachment:
app.zip [633.02 KiB]
Downloaded 842 times


Step1
Unzip app.zip to directory AndeSight_Root/mcu.
Or you can unzip app.zip, copy "app" folder to directory AndeSight_Root/mcu.
Attachment:
1.png
1.png [ 6.57 KiB | Viewed 7395 times ]


Step2
Copy license file to "app" folder, and rename it as "license.txt".
Run detect.bat.
Attachment:
2.png
2.png [ 3.85 KiB | Viewed 7395 times ]


The other way, you can run detect.bat in DOS command [The path and file name of the license]
Ex : detect.bat .\license_other.txt
Attachment:
3.png
3.png [ 15.27 KiB | Viewed 7395 times ]


Step3
After running the detection tool, it generates "log" folder and file "launch4j.log".
If the size of file log_xxxx.txt is equal to 0, it means the installation is successful.
If it can't work, please compress the folder and file, and send it to Andes support team. Thank you.

------------------------------
Chinese instruction:

請下載這個小工具:
Attachment:
app.zip [633.02 KiB]
Downloaded 842 times


Step1
解壓縮至AndeSight_Root/mcu 目錄下
或是先解壓縮複製"app" folder to AndeSight_Root/mcu 目錄下
Attachment:
1.png
1.png [ 6.57 KiB | Viewed 7395 times ]


Step2
將license檔案複製到app目錄下,並重新命名為"license.txt"
執行detect.bat
Attachment:
2.png
2.png [ 3.85 KiB | Viewed 7395 times ]


或是在DOS視窗中執行 detect.bat [license的路徑與檔名]
Ex : detect.bat .\license_other.txt
Attachment:
3.png
3.png [ 15.27 KiB | Viewed 7395 times ]


Step3
執行完後會產生log目錄與launch4j.log檔案
如果log_xxxx.txt 檔案size為0表示已成功安裝。請重開AndeSight試試能不能用。
如有問題請將目錄與檔案壓縮後寄回,謝謝!!

Page 1 of 1 All times are UTC + 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/