Andes Workshop http://forum.andestech.com/ |
|
簡易random pattern的memory測試(使用gdb) http://forum.andestech.com/viewtopic.php?f=16&t=222 |
Page 1 of 1 |
Author: | cindy [ Fri Dec 23, 2011 6:02 pm ] |
Post subject: | 簡易random pattern的memory測試(使用gdb) |
當我們要開發軟件時,首先要驗證memory讀寫正確。 下面的例子雖然是以Andes 32 bit risc cpu(Andes晶心科技)為例, 但是gdb script的用法各家cpu都是一樣的。 下面是一個簡易的memory的測試檔案。 裡面是針對ILM的測試。您也可以改一下script,改成對DLM或是DRAM。 Attachment: 解開檔案後,裡面有一個gdb script。在這個linker script中,先將ILM (instruction local memory) enable,然後restore一個64k大小的檔案到ILM。如果您不需要初始化ILM,去掉這一行” set $ilmb=0x1” 因為我們用的SOC上的ILM是一個寫入很慢的flash,所以我dump memory有3次,以比較它的不同。 Code: target remote:1234 echo >>> I connect the target \n set $ilmb=0x1 echo >>> set $ilmb \n restore 64k.bin binary 0x0 echo >>> after restore \n dump memory ilm1_dump1 0x0 0x10000 echo >>> after ilm1_dump1 \n dump memory ilm1_dump2 0x0 0x10000 echo >>> after ilm1_dump2 \n dump memory ilm1_dump3 0x0 0x10000 echo >>> after ilm1_dump3 \n echo >>> Complete!! \n disconnect quit 使用方法 Attachment: p1.gif [ 11.53 KiB | Viewed 8197 times ] 先啟動ICEman,然後執行gdb script。 得到幾個memory dump檔案。 然後用Cygnus比對寫入的檔案和讀出是否相同。 Attachment: 如上圖就是正確的。 比對用的檔案64k.bin檔我是用cygwin下打dd指令產生的。 指令 Code: dd bs=1024 if=/dev/random of=64k.bin count=64 Attachment: p3.gif [ 8.92 KiB | Viewed 8197 times ] |
Page 1 of 1 | All times are UTC + 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |