Andes Workshop
http://forum.andestech.com/

AICE-MCU V1.8.8 field upgrade
http://forum.andestech.com/viewtopic.php?f=13&t=897
Page 1 of 1

Author:  jonathan [ Wed Oct 22, 2014 11:49 am ]
Post subject:  AICE-MCU V1.8.8 field upgrade

Note:If your version is older than V1.7.7,You must upgrade to V1.7.7 then to do V1.8.8 upgrade.
Here is V1.7.7 upgrade method:[http://forum.andestech.com/viewtopic.php?f=13&t=700]


AICE-MCU field upgrade intructions

1. Download the file "AICE_MCU_V1.8.8_offical.zip".
Attachment:
AICE-MCU_V1.8.8_official.zip [125.14 KiB]
Downloaded 1178 times

2. Install libusb-win32 driver in AndeSight if it does not exist.
Attachment:
libusb driver.jpg
libusb driver.jpg [ 56.6 KiB | Viewed 12529 times ]

3. Plug in USB cable of AICE-MCU
Attachment:
plug in ICE.jpg
plug in ICE.jpg [ 196.09 KiB | Viewed 12529 times ]


4. Execute upgrade_aice_mcu.bat for upgrade. It takes 6 minutes totally.
DO NOT terminate the program or unplug the USB cable while the upgrade is in progress.

[1] AICE-MCU FW upgrade, it takes 42 seconds
Attachment:
ICEman.png
ICEman.png [ 60.89 KiB | Viewed 12529 times ]

[2] FPGA bitmap upgrade, it takes 5 minutes
Attachment:
ICEmcu update.jpg
ICEmcu update.jpg [ 62.28 KiB | Viewed 12529 times ]

[3] Upgraded done and unplug/replug in USB cable for reset AICE-MCU
Attachment:
ICEmcu update done.jpg
ICEmcu update done.jpg [ 49.97 KiB | Viewed 12529 times ]


5. Execute check_version.bat to get the version, then check whether the upgrade is successful.
Attachment:
ICEmcu version.jpg
ICEmcu version.jpg [ 45.8 KiB | Viewed 12529 times ]


If you have any questions, please contact Andes service team.

Page 1 of 1 All times are UTC + 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/