Andes Workshop http://forum.andestech.com/ |
|
AICE-MCU v1.3.2 firmware更新說明 http://forum.andestech.com/viewtopic.php?f=13&t=573 |
Page 1 of 1 |
Author: | cindy [ Wed Apr 25, 2012 11:36 am ] |
Post subject: | AICE-MCU v1.3.2 firmware更新說明 |
AICE-MCU v1.3.2 firmware更新說明 請先下載此附件: Attachment: 解壓縮後得到下面幾個檔案: Attachment: p1.gif [ 12.68 KiB | Viewed 14942 times ] (1)如下圖,將AICE-MCU與PC連接。 Attachment: p5.jpg [ 32.89 KiB | Viewed 14938 times ] (2)打開Windows命令提示字元(cmd.exe),打入下面command ICEman.exe --update-fw aice_mcu_c51.bin Attachment: p3.gif [ 13.63 KiB | Viewed 14942 times ] 大約需要3.5分鐘。注意!一定要等它燒完。 如果沒燒完就斷電,可能會無法重燒。 (3)請將AICE-MCU連接的USB線重新插拔, 如下圖,我們看到firmware更新為0x3,即更新完成。 Attachment: p4.gif [ 9.45 KiB | Viewed 14942 times ] 注意事項: 必須要有AICE-MCU的driver才行。 如果沒有安裝過Andesight v2.0.0或BSP 3.1.0的PC, 請先安裝以上其中1套軟體,才會有driver。 |
Page 1 of 1 | All times are UTC + 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |