Andes Workshop
http://forum.andestech.com/

AICE-MCU v1.3.2 firmware更新說明
http://forum.andestech.com/viewtopic.php?f=13&t=573
Page 1 of 1

Author:  cindy [ Wed Apr 25, 2012 11:36 am ]
Post subject:  AICE-MCU v1.3.2 firmware更新說明

AICE-MCU v1.3.2 firmware更新說明
請先下載此附件:
Attachment:
aice_mcu.zip [957.59 KiB]
Downloaded 1398 times


解壓縮後得到下面幾個檔案:
Attachment:
p1.gif
p1.gif [ 12.68 KiB | Viewed 14734 times ]


(1)如下圖,將AICE-MCU與PC連接。
Attachment:
p5.jpg
p5.jpg [ 32.89 KiB | Viewed 14730 times ]


(2)打開Windows命令提示字元(cmd.exe),打入下面command
ICEman.exe --update-fw aice_mcu_c51.bin
Attachment:
p3.gif
p3.gif [ 13.63 KiB | Viewed 14734 times ]

大約需要3.5分鐘。注意!一定要等它燒完。
如果沒燒完就斷電,可能會無法重燒。


(3)請將AICE-MCU連接的USB線重新插拔,
如下圖,我們看到firmware更新為0x3,即更新完成。
Attachment:
p4.gif
p4.gif [ 9.45 KiB | Viewed 14734 times ]


注意事項:
必須要有AICE-MCU的driver才行。
如果沒有安裝過Andesight v2.0.0或BSP 3.1.0的PC,
請先安裝以上其中1套軟體,才會有driver。

Page 1 of 1 All times are UTC + 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/