Andes Workshop
http://forum.andestech.com/

AICE BOX v1.6.6 firmware更新說明
http://forum.andestech.com/viewtopic.php?f=13&t=551
Page 1 of 1

Author:  cindy [ Fri Mar 09, 2012 6:37 pm ]
Post subject:  AICE BOX v1.6.6 firmware更新說明

AICE BOX v1.6.6 firmware更新說明

(1)請將更新軟體下載後解壓縮。
Attachment:
AICE v1.6.6 binary files 20120319.zip [257.64 KiB]
Downloaded 1436 times

如下圖,這是我們解壓縮後的檔案。
Attachment:
p1.gif
p1.gif [ 15.94 KiB | Viewed 14754 times ]

icekit中的UPGRADE.txt裡有說明,以下是照著說明demo。

(2)如下圖,將AICE與PC相接。
Attachment:
p2.jpg
p2.jpg [ 26.37 KiB | Viewed 14754 times ]


(3)開啟cmd.exe,切換到剛才解壓縮後的icekit目錄。

(4)依指示操作
3. run check_version.bat to verify that AICE is at version 1.5.5
C:> check_version.bat
如下圖,可知我的AICE是1.5.5版。
Attachment:
p3.gif
p3.gif [ 3.3 KiB | Viewed 14740 times ]


4. run upgrade_firmware.bat to upgrade the firmware
It will take about 8.5 minutes to complete the upgrade
C:> upgrade_aice.bat
如下圖,順利燒錄完成。
Note:更新過程需要8分鐘半,務必要全部更新完成才可以拔掉usb線。
否則無法使用,要送回Andes修理。

Attachment:
p4.gif
p4.gif [ 8.56 KiB | Viewed 14740 times ]


5. disconnect and reconnect the USB cable to reset the ICEBOX
6. run check_version.bat to confirm upgrade to 1.6.6 is done
C:> check_version.bat
重新插拔USB cable後,如下圖,我的AICE已成功升級為1.6.6
Attachment:
p5.gif
p5.gif [ 2.61 KiB | Viewed 14740 times ]


--------------2012/3/23補充-----------
目前遇過更新失敗的情況,出現在後面的fpga更新,發生usb timeout。
如果更新失敗的話,請將AICE的usb線重插拔,
再依原步驟更新一次。
如果還是有問題的話,要將AICE送回Andes維修。

Page 1 of 1 All times are UTC + 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/