Andes Workshop http://forum.andestech.com/ |
|
AICE BOX v1.6.6 firmware更新說明 http://forum.andestech.com/viewtopic.php?f=13&t=551 |
Page 1 of 1 |
Author: | cindy [ Fri Mar 09, 2012 6:37 pm ] |
Post subject: | AICE BOX v1.6.6 firmware更新說明 |
AICE BOX v1.6.6 firmware更新說明 (1)請將更新軟體下載後解壓縮。 Attachment: 如下圖,這是我們解壓縮後的檔案。 Attachment: p1.gif [ 15.94 KiB | Viewed 14855 times ] icekit中的UPGRADE.txt裡有說明,以下是照著說明demo。 (2)如下圖,將AICE與PC相接。 Attachment: p2.jpg [ 26.37 KiB | Viewed 14855 times ] (3)開啟cmd.exe,切換到剛才解壓縮後的icekit目錄。 (4)依指示操作 3. run check_version.bat to verify that AICE is at version 1.5.5 C:> check_version.bat 如下圖,可知我的AICE是1.5.5版。 Attachment: p3.gif [ 3.3 KiB | Viewed 14841 times ] 4. run upgrade_firmware.bat to upgrade the firmware It will take about 8.5 minutes to complete the upgrade C:> upgrade_aice.bat 如下圖,順利燒錄完成。 Note:更新過程需要8分鐘半,務必要全部更新完成才可以拔掉usb線。 否則無法使用,要送回Andes修理。 Attachment: p4.gif [ 8.56 KiB | Viewed 14841 times ] 5. disconnect and reconnect the USB cable to reset the ICEBOX 6. run check_version.bat to confirm upgrade to 1.6.6 is done C:> check_version.bat 重新插拔USB cable後,如下圖,我的AICE已成功升級為1.6.6 Attachment: p5.gif [ 2.61 KiB | Viewed 14841 times ] --------------2012/3/23補充----------- 目前遇過更新失敗的情況,出現在後面的fpga更新,發生usb timeout。 如果更新失敗的話,請將AICE的usb線重插拔, 再依原步驟更新一次。 如果還是有問題的話,要將AICE送回Andes維修。 |
Page 1 of 1 | All times are UTC + 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |